Introduction to medium frequency bendMedium frequency pipe bender adopts medium frequency electric induction heating to bend the workpiece under the condition of local heating.Compared with the general cold pipe bender, not only does not need a complete set of special mold, but also the volume of th
30
2017-11
Technical parameters of the fourth generation power supply 1. Power range: 20kW-50kW (2khz-600khz) 50 kw to 100 kw (2 KHZ to 500 KHZ) 100 kw to 200 kw (0.2 kHz to 400 kHz) 200 kw to 300 kw (0.2 kHz to 200 kHz) 300 kw to 500 kw (0.2 kHz - 50 kHz) 500 kw to 2000 kw (0.
14
2017-11
Technical parameters of the fourth generation power supply
06
2017-11
Advantages and characteristics of high frequency induction heating machineAdvantages of high frequency induction heating machine:1. Quick heating: the required target temperature can be heated to the desired target in seconds compared with other methods.2. Can be local heating: only heating steel be
27
2017-10
Induction heating English crystal growth can be applied to: silicon carbide, sapphire, laser crystal and other crystals.The type of crucible can be: graphite crucible, iridium crucible, tungsten molybdenum crucible, platinum crucible, etc
25
2017-10
The advantages of induction heater1) induction heating is not necessary to heat the workpiece as a whole. It can be used selectively to heat the parts, so as to achieve the purpose of low energy consumption, and the deformation of the workpiece is not obvious. 2) the heating speed can make the workp
23
2017-10
1.Traditional Heating:Traditional coal, gas, oil heating, serious pollution, poor working environment, serious safety hazards. coal, gas and oil heat slow and uneven, and easy to deformation of workpiece, oxide layer, poor quality, more not smooth surface, high rejection rate, in the present this ki
13
2017-10
Kechuang Induction Heating Machine Features1. Control core: adopt the world's most advanced high-speed digital signal processor (HDSP), and use the special chip developed by OG-induction as the auxiliary processor.2. adopting the new generation IGBT or MOSFET as the main inverter, combined with the
21
2017-09
Are you looking for energy-efficient heating methods?Induction heating can help you. The principle of induction heating is the alternating magnetic field generated by high frequency current, which generates vortex and heat in the metal workpiece.The theory of induction heating can be traced backUp t
12
2017-09
Electromagnetic heating advantages introduction